Keep your CCTV recording through loadshedding
Power cuts are the main reason CCTV footage goes missing in Pakistan. How to size a UPS or DC backup so your cameras and recorder keep running.

Many CCTV systems in Pakistan look fine during the day but record nothing during loadshedding, which is exactly when intruders like to act. The fix is simple and affordable: dedicated backup power for your surveillance system.
Why recordings go missing
- The recorder reboots every time the power switches between grid and inverter.
- Cameras lose power and night vision stops.
- Hard drives get corrupted by repeated hard shutdowns.
Option 1: Small online/line-interactive UPS
Powers the DVR/NVR and the camera power supply together. A UPS sized for the total wattage, with a long-backup battery, gives hours of runtime for a typical home system.
Option 2: DC backup power supply
A 12V DC power box with a built-in battery charger powers analog cameras directly and switches over with no gap. It’s very efficient for HD analog systems.
Option 3: PoE with UPS (IP systems)
For IP systems, put the NVR and the PoE switch on a UPS. Every camera then gets backup power through its network cable.
Sizing at a glance
| System | Approx. load | Suggested backup |
|---|---|---|
| 4 cameras + DVR | Low | DC backup box or small UPS |
| 8 IP cameras + NVR + PoE | Medium | UPS with external battery |
| 16+ cameras | Higher | Rack UPS, plus solar for remote sites |
Tip: always use a surveillance-grade hard drive. It’s designed for 24/7 writing and copes far better with power events.
MZS Tech designs every CCTV system with power backup in mind. Talk to an engineer or see our CCTV installation service.