Most popular Conventional fire alarms
- Zone-based smoke and heat detection
- Sounders, strobes and call points
- Battery-backed control panel
- Suits homes, shops and small offices
- Simple, low-cost maintenance
فائر الارم سسٹم
We design, install and service fire detection for homes, plazas, schools, clinics, hotels and factories. Systems follow BS 5839 and NFPA 72 practice, and you get the drawings and test certificate that inspectors ask for.

A fire in a store room or electrical DB can burn for a long time before anyone smells it.
Plazas and factories risk notices, sealing or a rejected insurance claim without a working system.
Dusty detectors, dead batteries and a silenced buzzer make the system decorative.
In an empty building at night, an alarm only helps if someone’s phone rings.
We size the system to your building and hand over drawings and a test certificate.
Most popular
For large buildings
Easiest install We size the system to the floor area, occupancy and risk of the building, and document every zone and device.
| ConventionalHomes, shops, small offices | AddressableFactories, hospitals, hotels | WirelessFinished interiors, retrofits | |
|---|---|---|---|
| Shows the location as | A zone (e.g. first floor) | The exact device and room | The exact device |
| Wiring | One circuit per zone | Fault-tolerant loop | None to detectors |
| Integrations | Sounders, strobes, basic outputs | Lifts, HVAC, doors, BMS | CCTV pop-up, phone alerts |
| Upfront cost | Lowest | Highest | Middle |
| Maintenance | Simple | Fastest fault-finding | Battery changes |



How we plan and install fire alarm systems in Lahore.
Under Punjab building rules and Civil Defence inspections, commercial plazas, factories, schools, hospitals and high-rises are expected to have automatic fire detection. We survey the building, assess occupancy and risk, and give you a device layout with a written quote.
For homes, a few well-placed smoke and heat detectors with a small panel and sounders give your family warning at night, when it matters most. Kitchens, generator rooms and electrical areas get heat detectors instead of smoke.
We fit detectors, manual call points, sounders and strobes, and run fire-rated cable back to a panel with battery backup. Every device is tested and your staff are trained. You receive as-built drawings, a zone chart and a test certificate.
Our maintenance visits cover functional testing, detector cleaning, battery replacement, logbook entries and priority call-outs. We also take over systems installed by other companies.
Genuine stock with manufacturer warranty
Also EZVIZ, Uniview, Notifier, Apollo, Nemtek, JVA, Seagate SkyHawk and WD Purple drives, and TP-Link networking. Logos are trademarks of their owners and identify the hardware we install; MZS Tech is an independent installer.
Same team from the first call to the last cable tie. We don’t pass jobs to subcontractors.
A conventional system groups detectors into zones, so the panel tells you which area is in alarm. An addressable system identifies each individual device, which speeds up the response and maintenance in large buildings.
Commercial, industrial, educational, healthcare and high-rise buildings are generally expected to have fire detection under Punjab building and Civil Defence requirements. Homes are not legally required to, but we strongly recommend it.
Yes. A GSM or IP communicator sends SMS, calls or app notifications to owners and security staff on an alarm or fault.
A functional test at least every six months and a full service every year, with weekly call-point tests by your own staff.
Yes. We carry out a condition survey, fix any faults, and then start the maintenance contract.
Call or send a WhatsApp with your area and what you want covered. We’ll fix a time to come and see it. The visit is free.