CCTV maintenance checklist: what to check every six months
Ten simple checks that keep a CCTV system recording, from hard drive health to camera angles, plus when to call a technician.

Most CCTV failures are discovered at the worst moment: when you need footage and it isn’t there. These checks take less than an hour and catch most problems early.
Every six months
- Play back yesterday’s footage from every camera. If one is missing, find out why now.
- Check hard drive status in the recorder menu. Anything other than “Normal” needs attention.
- Check how many days are stored. If the oldest recording is only a day or two old, the drive is too small or failing.
- Clean the camera lenses with a soft cloth. Dust and spider webs blur night vision badly.
- Look at each camera’s view. Wind, birds and maintenance work knock cameras out of position.
- Test night vision after dark. A camera that has lost infrared shows only black.
- Check the date and time. Wrong timestamps make footage much weaker as evidence.
- Test the UPS by switching off mains power briefly. Recording should continue.
- Check cables and junction boxes for water ingress after the monsoon.
- Update passwords if staff have changed, and remove old users from the app.
When to call a technician
- A camera shows no picture or a rolling image.
- The hard drive reports errors.
- The recorder restarts on its own.
- Footage is missing during power cuts.
MZS Tech offers maintenance contracts covering these checks, repairs and priority call-outs. Learn more about our CCTV service.